BD-1000M-POE series is a 10/100/1000Base-TX to 1000Base-FX (also can be forced to 100Base-FX) media converter, which allows two types of network segment to be connected easily. Complied with IEEE802.3at or IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3at or IEEE802.3af powered device (PD) over CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function, etc. The LFP (Link Fauit Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.

Features

2       10/100/1000Base-TX UTP to 1000Base-FX fiber media convertion

2       IEEE802.3af PoE PSE compatible

2       9K bytes packet at cut-through mode

2       Built-in AC/DC power supply

2       Over-current protection

2       choice of SC, BiDi or LC connectors for multimode and singlemode

2       DIP switch to set different configurations

2       LFP (Link Fault Pass-through) support

1000Base-FX Optical interface:

Connector: SC,FC or ST are optional

Wavelength: 1310nm,1550nm or 850nm(can be chosen by customer)

Optical fiber category:

Ø       single-mode 8.3/125, 8.7/125, 9/125, 10/125um

Ø       multi-mode 50/125, 62.5/125, 100/140um

multi- mode connection: transmitting range can reach 5 kilometers as farthest;

single-mode connection: transmitting range can reach 100 kilometers.

10/100/1000M Base-TX: 

Connector: UTP RJ45 connector 

Data Rates:

10/100/1000Mbps 

(IEEE802.3U IEEE802.3z 1000Base-Tx)

1000Mbps (1000Base-FX) or 

100Mbps (100Base-FX)

Power over Ethernet Output:

Pin Assignment and Polarity:4/5 (V+),7/8 (V-)
Output Power: please refer to ordering information
Efficiency: 75% min
Short circuit protection: auto recovery
Over current protection: auto recovery

Optical Specification :

Dimension                  

2      95mm(L)x70mm(W)x26mm(H)

 Environment condition                  

Operating temperature:  0C~+55 C        

Storage temperature:   -20 C~+70 C

Relative temperature: 95%

Ordering Information: